delete

Tips on How to Clean Your Swimming Pool Water

Actually, cleaning your swimming pool water is not supposed to be a regular requirement if the pool water is tested on a regular basis and the pool filters are always kept clean and maintained. 

Cartridge Filter 

Clean the cartridge filter every time the pressure becomes too high. After turning off the pool circulatory system, the pressure in your cartridge can be discharged therefore, the cartridge can be safely removed. Wash thoroughly the outside portion of the cartridge and soak it in the cartridge cleaning agent according to the manufacturer’s instructions. 

Adding Chemicals to Your Pool Water 

You can have all the needed chemicals from a local pool supplies store. As a matter of fact, they will always have instructions or directions for use and come under an established trade name. You should always use the chemicals or cleaning solutions as instructed on the packaging. In addition to that, you should always make sure that the filter system is operating when you add the chemicals into your swimming pool. Add chemicals to the water to form a suspension or solution prior to adding them to your pool in order to ensure faster dispersal. 

Three Tests 

The water condition can be tested with the use of pH levels, calcium hardness and alkalinity as a guide. And since these are all interrelated with each other, it is already an achievement to get the levels back right together. These 3 tests are usually the basis of pool water maintenance. 

pH Level 

The pH test kit should present a level between 7.2 to 7.6. If the level of pH is too low, you may add sodium bicarbonate to your swimming pool. On the other hand, if it appears too high, you should add sodium bisulfate. 

Testing Kits 

Pool water test kits are available at any pool supplies outlets or stores and must be used according to the instructions which come with them. Using a test kit incorrectly will definitely lead you to false readings as well as could potentially damage your accessories and the pool itself if you take wrongful actions based on the incorrect results. 

Calcium Hardness 

The calcium hardness ideally should be 200 to 400 ppm. You may use sodium hexametaphosphate to reduce the level and calcium carbonate dehydrate to increase it. 

Alkalinity Level 

The alkalinity level must be ideally between 100 and 120 ppm. Use sodium bisulfate to lower the level and sodium bicarbonate to raise it. 

A properly maintained swimming pool should not require to have the pool water cleaned however, if the need arises, try to recognize the main reason why the water turned dirty and polluted and try also to prevent that from happening. 

Cleaning Products 

Several individuals make some errors of cleaning their filtration or pump system with home cleaners. While this might make sense theoretically, it may be hazardous to the living environment of your pond. If you feel that you already need to clean your pool with more than just elbow grease and water, go to a local pond supply outlet and get a bacteria or enzyme cleaner or you can also directly contact a professional pool maintenance San Antonio.